| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Koa sides? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=5823 |
Page 1 of 1 |
| Author: | Daniel M [ Sat Mar 25, 2006 5:25 pm ] |
| Post subject: | |
Hi Folks; Having just broken a nice Koa side,  I'm on the hunt for a replacement set of sides to match the back in the pic.
If anyone can help, I sure would appreciate it. The wood came from Steve at Colonial, but it was a while ago & he doesn't have any more like it. Thanks, Dan 
|
|
| Author: | PaddyD [ Sat Mar 25, 2006 7:04 pm ] |
| Post subject: | |
hey daniel, try ed dicks at AC woods, he just processed 1000 sets of koa, i think he may be able to find some sides, 
paddy |
|
| Author: | RussellR [ Sat Mar 25, 2006 7:24 pm ] |
| Post subject: | |
Hey Dan I hope thats not the sides in the plastic bag behind the back
|
|
| Author: | Michael Dale Payne [ Mon Mar 27, 2006 12:19 am ] |
| Post subject: | |
if the wood split on grain lines it is possible to cafully glue back togather. The key is tight fit at the brake. Thin CA is great for this. Robbie O'Brien had post about a week ago on a roswood set that one of his students repaired. |
|
| Author: | Serge Poirier [ Mon Mar 27, 2006 12:24 am ] |
| Post subject: | |
Dan, sorry to hear about this, good luck in either finding sides or repairing them. Serge |
|
| Author: | Brad Goodman [ Mon Mar 27, 2006 12:59 am ] |
| Post subject: | |
Daniel, I might have a set, I will have to check. Thanks, Brad |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|